Breaking Down Assessment Validation: Steps to Validate Assessments
Breaking Down Assessment Validation: Steps to Validate Assessments
Blog Article
RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.
Although we have published several articles on validation, let’s revisit the term. ASQA describes validation as a quality review of the assessment process.
Validation is the process of confirming accurate areas in an RTO's assessment process and pinpointing elements for improvement. With a correct understanding of its components, it’s less daunting.
According to Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and are conducted according to the Principles of Assessment and Rules of Evidence.
According to the standards, two types of validation must be conducted.
The primary type of assessment validation verifies that your RTO's assessment meets the training package requirements.
The next validation type confirms assessments are conducted following the principles of assessment and rules of evidence.
It indicates that validation occurs both before and after the assessment. The focus here is on the first type: assessment tool validation.
A Look at the Two Types of Assessment Validation
An Introduction to Assessment Validation
As noted earlier and in our earlier blog entries, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, sometimes called pre-assessment validation, focuses on ensuring all unit requirements are met, in line with the first part of the clause, ensuring complete workbook compliance.
On the implementation side, post-assessment validation ensures Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
Our focus in this article will be on assessment tool validation.
Conducting Assessment Tool Validation
Having discussed the two types of validation, let’s delve into assessment tool validation.
When is Assessment Tool Validation Conducted?
The aim of assessment tool validation is to make sure that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.
This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.
You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.
Still, this isn't the only reason to perform this type of validation. Conduct assessment tool validation also when you:
- you update your resources
- new training products get added on scope
- your course gets reviewed against training product updates
- you identify your learning resources as a risk during your risk assessment
ASQA applies a risk-based approach to regulate RTOs, expecting regular risk assessments. Hence, student complaints about learning resources are a good opportunity for assessment tool validation.
What Training Products Need Validation?
Recall, this type of validation aims to ensure all learning resources are compliant before use. All RTOs must validate each unit's resources.
Starting Assessment Tool Validation: What You Need
Teaching Materials
Since you are conducting assessment tool validation, you will need the entire suite of your learning resources:
Mapping tool – start by investigating this document. It shows which assessment items meet unit requirements, facilitating quicker validation.
Learner/student workbook – check its suitability as an assessment tool during validation. Ensure instructions are clear and answer fields are sufficient. This is a common issue.
Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item are present. Clear benchmarks are crucial for reliable assessment outcomes.
Other related resources – could include checklists, registers, and templates developed apart from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.
Validation Board
Clause 1.11 outlines the requirements for validation panel members, noting that validation can be done by one or more people. Typically, RTOs require all trainers and assessors to attend and may invite industry experts.
Collectively, your validation panel should have:
Vocational competencies and current industry skills applicable to the unit being validated
Current knowledge and skills in vocational teaching and learning
One of these training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or the next version
Assessment validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool supports the validation process and documentation. It simplifies understanding how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It serves as documentation that you have validated your resources prior to student use.
ASQA does not specify a recommended or required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools in their entirety to ensure they meet the principles of assessment.
Principles of Assessment Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Although these templates ease the validation process, they can cause errors in judgment as there is minimal space for commenting on each assessment item.
It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Directions Benchmarks Assessment Instrument Rectification Recommendations
What do read more you Need to Check?
What to Inspect?
As detailed in our blog post Common Problems In Assessment Tools, it is crucial that your assessment tools enable trainers to adhere to assessment principles and evidence rules.
Principles of Assessment
Fairness – Is the assessment process equitable and accessible to everyone?
Flexibility – Does the assessment offer various options to demonstrate competence based on different needs and preferences?
Validity – Does the assessment measure what it is supposed to measure? Is it a valid tool for evaluating the required skill or knowledge?
Reliability – Will the assessment produce the same results each time, regardless of who conducts the training? Will different assessors make consistent decisions on skill competence?
Evidence Basic Rules
Validity – Is the evidence confirming that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there enough evidence to confirm the learner has the required skills and knowledge?
Authenticity – Does the assessment tool confirm that the work is the candidate’s own?
Currency – Are the assessment tools reflective of current units of competency and contemporary industry practices?
Even though these are frequently addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.
To prevent using learning resources that do not meet some unit requirements, make sure to follow these guidelines:
Practice Your Teachings
Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
changing diapers
prepare bottle, bottle feed babies and clean equipment
prepare solid foods and feed babies
respond to baby signs and cues suitably
prepare babies for sleep and soothe them
monitor and support physical exploration and gross motor skills appropriate for the age
Having students explain the process of nappy changing for babies under 12 months doesn’t meet the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Mind the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.
Full or Not Competent
Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be More Specific?
Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What details can be included in a work package?
The answer could include:
Essential resources
Corresponding costs
Duration of activities
Appointed duties and responsibilities
When an assessment item requires multiple answers, specify how many answers a student must provide. This way, your assessment remains reliable, and the evidence collected is valid.
The same applies to assessment items with double-barrelled questions or those that ask for multiple answers simultaneously. Such questions can confuse both students and assessors, as illustrated in the example below:
Identify a hazard and/or environmental issue in the work area and select the most effective hazard control hierarchy.
Answers might include, but are not limited to:
Weather conditions – isolating the work area, engineering controls, PPE
Work area and ground conditions – eliminating hazards, isolation, use of engineering controls
People – isolating, engineering, administration
Structural hazards – substituting, isolation, use of engineering controls
Chemical hazards – isolation, engineering, administrative controls
Equipment or machinery – isolating, engineering controls, administration
Avoiding double-barrelled questions simplifies responses for students and allows assessors to accurately judge student competence.
Seeing these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees mean you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s wiser to take a safe and compliant approach.